VIGIFLAP
APPLICATIONS
The VigiFLAP is a non-return valve designed to prevent overpressure or flame caused by a downstream explosion (dust collectors, filters, cyclones…) to propagate in the piping system.The valve is held open by a lever arm. It can be used both at the entrance and at the exit of the filter.This allows to isolate the filter from an explosion or an overpressure.In case of explosion, the valve closes and remains locked preventing the progress of the flame.The unlocking of the flap is done manually.
Explosion Isolation valve
HIGH CERTIFICATION TESTTo get our Atex certificate (N° INERIS 19ATEX0016X) according to the standard EN16447: 2014, we carried out our explosion tests in the most extreme conditions and as close as possible to the reality of the use of the product, with for example:Protected Zone Pipeline :All test carried out with a pipeline after the flap (picture1).Flap fully open :During the test the flap valve is held fully open until the appropriate time of release.Vent panel on test vessel :No open ports were used during test but vent panels were always used.
SOON:In few months our VIGIFLAP certificate will be improved with the following additionnal features Atex certified :Push FlowVertical PositionElbowsSize until diameter 1300mmMetal dust + ST3
| DN (mm) | DN (inch) | Minimum Vessel Volume | LMin* Min Mounting Distance | LMin** Min Mounting Distance | L Max Max Mounting Distance | |
|---|---|---|---|---|---|---|
| DN (mm) | DN (inch) | Minimum Vessel Volume | LMin* Min Mounting Distance | LMin** Min Mounting Distance | L Max Max Mounting Distance | |
| DN (mm) | DN (inch) | Minimum Vessel Volume | LMin* Min Mounting Distance | LMin** Min Mounting Distance | L Max Max Mounting Distance | |
| DN (mm) | DN (inch) | Minimum Vessel Volume | LMin* Min Mounting Distance | LMin** Min Mounting Distance | L Max Max Mounting Distance | |
| DN (mm) | DN (inch) | Minimum Vessel Volume | LMin* Min Mounting Distance | LMin** Min Mounting Distance | L Max Max Mounting Distance | |
| ø160 | ø6* | 0,70m3 | 4,0m | 6,0m | 17m | |
| ø160 | ø6* | 1,35m3 | 3,0m | 5,0m | 17m | |
| ø180 | ø7* | 0,70m3 | 4,0m | 6,0m | 17m | |
| ø180 | ø7* | 1,35m3 | 3,0m | 5,0m | 17m | |
| ø200 | ø8* | 1,35m3 | 4,6m | 6,6m | 17m | |
| ø250 | ø10* | 1,35m3 | 4,0m | 6,0m | 17m | |
| ø300 | ø12* | 2,90m3 | 4,6m | 6,6m | 17m | |
| ø350 | ø14* | 2,90m3 | 4,2m | 6,2m | 17m | |
| ø400 | ø16* | 4,50m3 | 5,2m | 7,2m | 17m | |
| ø450 | ø18* | 4,50m3 | 4,7m | 6,7m | 17m | |
| ø500 | ø20* | 6,05m3 | 5,8m | 7,8m | 17m | |
| ø550 | ø22* | 6,05m3 | 5,5m | 7,5m | 17m | |
| ø600 | ø24* | 7,65m3 | 7,2m | 9,2m | 17m | |
| ø650 | ø26* | 7,65m3 | 6,7m | 8,7m | 17m | |
| ø700 | ø28* | 7,65m3 | 6,4m | 8,4m | 17m | |
| ø750 | ø30* | 10,00m3 | 7,3m | 9,3m | 17m | |
| ø800 | ø32* | 10,00m3 | 6,9m | 8,9m | 17m |
* Floating : Flap valve activated by the working air flow** Flap valve kept open by its spring blade system
| Kst max | ≤ 250 bar.m/s |
| Kst min | < 50 bar.m/s |
| Pmax | 10bar |
| MIE | ≥ 10 mJ |
| MIT | ≥ 400° |
| MESG | 1,7 mm |
| Pred, max* | ≤ 0,5 bar |
| ATEX-Mærkning |  II D |
| ATEX Indv. | Zone 20 (II 1 D) |
| Støvtype | Alle støvtyper inkl. metalstøv |
| Lufthastighed | 15m/s ≤ V ≤ 45m/s |
| Anvendelse | Støvholdig Luftstrøm Ren Luftstrøm |
| Proces- Luftstrøm | Undertryk og overtryk |
| Antal rørbøjninger | Uden begrænsninger |
| Støv-koncentration | Uden begrænsninger |
* Kst≤250 bar.m/s
